Shopping List

From MITNA
Revision as of 13:25, 30 August 2012 by Ted (Talk | contribs)

Jump to: navigation, search

Please add here parts and supplies that are needed for the boat.

needed

  • socket head cap screw for roller furler - 5/16"-32 5/8" long
  • pen holder for nav station
  • window gasket - fuller brush company; 12 3/8 x 5 1/4 gasket; 13.5 x 6.5 approx cutout
  • 2 collapsible oars for dinghy, with oar locks
  • cover for dinghy outboard - 5hp mercury circa 2005
  • baby stay - 50" pin-to-pin, 1/4" wire
  • swim ladder fender step
  • 50' 5/8" spring line (green? not gold/white)
  • adhesive for lazarette gaskets
  • 12v vacuum
  • 12v spotlight
  • all-plastic/rubber bucket to replace cracked red bucket
  • 1/8" diameter bolt, 1 1/4" shank for pulpit shear pin
  • stove
    • shutoff valve
    • solenoid (pending inspection/refurb of previous)

completed

  • 11jul12 2 2" exhaust clamps
  • 11jul12 3" blower hose, 20 feet
  • 06jul12 boom vang tube - 3/8" pin, 70" pin-to-pin, C-series
  • 03jul12 traveller sheets - 3/8" 2x20'
  • 03jul12 freshwater fill hose - 1.5" diam, 46" long
  • 03jul12 non-skid black strips
  • 03jul12 white life caulk, 2 tubes
  • 03jul12 black life caulk, 2 tubes
  • 03jul12 3 small parts trays (home depot)
  • 02jul12 set of drill bits
  • 02jul12 garden hose
  • 02jul12 winch handle pocket to be mounted on mast
  • 02jul12 large fender
  • 01jul12 freshwater overflow hose - 1.5" diam, 76" long - leftover from bilge hoses
  • 01jul12 dust brush and pan
  • 01jul12 scissors
  • 01jul12 large vise grips
  • 29jun12 in-line blower 3" - squirrel cage not inline
  • 29jun12 2 3/16"D 1.5" long fastpins for hatch locks
  • 29jun12 5 stand-up springs for halyard blocks
  • 29jun12 mast boot
  • 29jun12 steel bands for exhaust tape
  • 29jun12 large hose clamp
  • 29jul12 small gasoline can for dinghy refueling, keep in dock box
  • 29jul12 two-stroke oil for dinghy outboard
  • 28jun12 5 halyard blocks for 1/2" line (main, 2 spin, 2 jib) - ordered 5 3" harken blocks 26jun12
  • 28jun12 2 blocks for 1/2" line (main sheet) - ordered 2 2 1/4" harken blocks 26jun12
  • 26jun12 snap shackles for dinghy tie-ups
  • 26jun12 1 small waste bin for head
  • 26jun12 jib sheets for racing jib: 2x 3/4" line, 40 feet - deferred
  • 26jun12 boom vang tackle: 352131 (Harken 8:1 Tackle YR-XL), West Marine part no. 7358880 - ordered 15jun12
  • 26jun12 traveler car: harken T3242B.HL - ordered 15jun12
  • 22jun12 gasket material for raw water strainer - perko
  • 22jun12 stainless mesh for raw water strainer - perko approx 6" tall, 1 1/4" in/out pipes
  • 17jun12 large anchor/rode bag
  • 17jun12 2 large hose clamps for mast boot - 25 3/4" and 43"
  • 17jun12 wood dowels - 3/4" diameter and 1 1/8" diameter to plug toerail holes
  • 17jun12 hooks for line stowage in stbd v-berth bin
  • 17jun12 3 cheek blocks for 1/2" line (main halyard, main sheet)
  • 17jun12 two boat hooks
  • 16jun12 mast boot kit
  • 16jun12 2 rolls oil blotter
  • 16jun12 holding tank treatment 4 bottles
  • 16jun12 large fender to replace uninflatable deflated one
  • 16jun12 8 1.5" high quality hose clamps for scupper T fittings
  • 13jun12 binder for manuals - keith has it, will deliver to boat 07apr12
  • 12jun12 fiberglass insulation for exhaust riser
  • 12jun12 blower exhaust vent
  • 12jun12 coolant: ethylene glycol with sodium nitrate/benzoate, 2 gallons
  • 12jun12 oil: 15W40, 5 quarts
  • 12jun12 45 degree 1.25" elbow bronze for seawater in
  • 12jun12 nuts and lockwashers for exhaust riser
  • 11jun12 two oil hoses
  • 20may12 1" to 1.25" bronze coupling (via threaded reducer)
  • 19may12 starter motor - deliver to wally for rebuild 11may12
  • 19may12 transducer paint
  • 19may12 replacement screws for prop shaft coupling - will use old ones
  • 17may12 30 stainless screws oval head phillips #12 3" long
  • 16may12 traveler end controls
  • 13may12 stainless cotter pin sets
  • 13may12 stainless hinge for top cabin/engine step
  • 13may12 lock washers for engine bracket 3/8"
  • 13may12 stainless screws for engine mount 3/8", 1.5" long
  • 13may12 exhaust thru-hull
  • 13may12 engine seawater in hose
  • 13may12 bronze fittings for engine seawater in
  • 13may12 prop paint
  • 10may12 bottom paint - 3 gallons black - at pavilion
  • 08may12 exhaust riser for perkins engine - ready to install 01apr12
  • 08may12 engine bracket and engine mount - ordered by wally foster ??mar12
  • 22apr12 gojo hand cleaner
  • 22apr12 bleach
  • 22apr12 simple green
  • 22apr12 dust masks
  • 22apr12 misc electrical parts (wire, breakers, lamp fixtures)
  • 22apr12 misc hoses and fittings for cockpit scuppers
  • 22apr12 parts trays for fasteners
  •  ??apr12 hose for large manual pump
  • 22apr12 fitting for exhaust thru-hull 1-3/4" thread to 2-3/8" barbed/smooth
  • 01apr12 Y connector for 1-1/8" hose - ordered 01apr12 from jamestown
  •  ??apr12 JABSCO 29290-1000 strum box for 1" hose
  • 01apr12 whale gusher 10 rebuild kit
  • 01apr12 1" antisiphon loop (seawater in to engine)
  • 01apr12 10' engine stop cable plus hardware
  • 01apr12 6" length of 2" ID hose - on boat
  • 01apr12 Ultra Safety Systems Ultimate Mini float switch - on boat
  • 01apr12 bandaids - on boat
  • 01apr12 large and small wire ties - on boat
  • 01apr12 large and small nylon wire clamps - on boat
  • 01apr12 propane regulator - on boat
  •  ??mar12 sponges - package of 6 on boat