Shopping List

Please add here parts and supplies that are needed for the boat.

needed

• pen holder for nav station
• window gasket - fuller brush company; 12 3/8 x 5 1/4 gasket; 13.5 x 6.5 approx cutout
• hooks for fender stowage in port lazarette
• 3" blower hose, 20 feet
• 2 collapsible oars for dinghy, with oar locks
• cover for dinghy outboard - 5hp mercury circa 2005
• baby stay - 50" pin-to-pin, 1/4" wire
• swim ladder fender step
• 50' 5/8" spring line (green? not gold/white)
• adhesive for lazarette gaskets
• new lazy jacks, properly sized to main sail
• 12v vacuum
• 12v spotlight
• 2 2" exhaust clamps
• 40 #10 1.25" stainless steel flat head phillips screws (to re-bed forward hatch glass)
• all-plastic/rubber bucket to replace cracked red bucket
• 1/8" diameter bolt, 1 1/4" shank

• stove
  • propane hose 15'
  • shutoff valve
  • solenoid (pending inspection/refurb of previous)

• engine
  • transmission fluid: ?

• rigging
  • spinnaker halyard: 1/2" 130' white w/green (was 9/16") - ordered 27jun12, deliver 03jul12
  • main halyard: 1/2" 142' solid blue - ordered 27jun12, deliver 03jul12
  • jib sheets: 2x 5/8" 75' - (was 3/4") - ordered 27jun12, deliver 03jul12
  • main sheet: 1/2" 57' white - ordered 27jun12, deliver 03jul12
  • vang line: 3/8" 18' black - ordered 27jun12, deliver 03jul12
  • boom vang tube - 3/8" pin, 70" pin-to-pin, C-series - ordered 29jun12, deliver week of 4 july?
  • boom vang spring - ordered 29jun12, deliver in 4 weeks

completed

• 03jul12 traveller sheets - 3/8" 2x20'
• 03jul12 freshwater fill hose - 1.5" diam, 46" long
• 03jul12 non-skid black strips
• 03jul12 white life caulk, 2 tubes
• 03jul12 black life caulk, 2 tubes
• 03jul12 3 small parts trays (home depot)
• 02jul12 set of drill bits
• 02jul12 garden hose
• 02jul12 winch handle pocket to be mounted on mast
• 02jul12 large fender
• 01jul12 freshwater overflow hose - 1.5" diam, 76" long - leftover from bilge hoses
• 01jul12 dust brush and pan
• 01jul12 scissors
• 01jul12 large vise grips
• 29jun12 in-line blower 3" - squirrel cage not inline
• 29jun12 2 3/16"D 1.5" long fastpins for hatch locks
• 29jun12 5 stand-up springs for halyard blocks
• 29jun12 mast boot
• 29jun12 steel bands for exhaust tape
• 29jun12 large hose clamp
• 29jul12 small gasoline can for dinghy refueling, keep in dock box
• 29jul12 two-stroke oil for dinghy outboard
• 28jun12 5 halyard blocks for 1/2" line (main, 2 spin, 2 jib) - ordered 5 3" harken blocks 26jun12
• 28jun12 2 blocks for 1/2" line (main sheet) - ordered 2 2 1/4" harken blocks 26jun12
• 26jun12 snap shackles for dinghy tie-ups
• 26jun12 1 small waste bin for head
• 26jun12 jib sheets for racing jib: 2x 3/4" line, 40 feet - deferred
• 26jun12 boom vang tackle: 352131 (Harken 8:1 Tackle YR-XL), West Marine part no. 7358880 - ordered 15jun12
• 26jun12 traveler car: harken T3242B.HL - ordered 15jun12
• 22jun12 gasket material for raw water strainer - perko
• 22jun12 stainless mesh for raw water strainer - perko approx 6" tall, 1 1/4" in/out pipes
• 17jun12 large anchor/rode bag
• 17jun12 2 large hose clamps for mast boot - 25 3/4" and 43"
• 17jun12 wood dowels - 3/4" diameter and 1 1/8" diameter to plug toerail holes
• 17jun12 hooks for line stowage in stbd v-berth bin
• 17jun12 3 cheek blocks for 1/2" line (main halyard, main sheet)
• 17jun12 two boat hooks
• 16jun12 mast boot kit
• 16jun12 2 rolls oil blotter
• 16jun12 holding tank treatment 4 bottles
• 16jun12 large fender to replace uninflatable deflated one
• 16jun12 8 1.5" high quality hose clamps for scupper T fittings
• 13jun12 binder for manuals - keith has it, will deliver to boat 07apr12
• 12jun12 fiberglass insulation for exhaust riser
• 12jun12 blower exhaust vent
• 12jun12 coolant: ethylene glycol with sodium nitrate/benzoate, 2 gallons
• 12jun12 oil: 15W40, 5 quarts
• 12jun12 45 degree 1.25" elbow bronze for seawater in
• 12jun12 nuts and lockwashers for exhaust riser
• 11jun12 two oil hoses
• 20may12 1" to 1.25" bronze coupling (via threaded reducer)
• 19may12 starter motor - deliver to wally for rebuild 11may12
• 19may12 transducer paint
• 19may12 replacement screws for prop shaft coupling - will use old ones
• 17may12 30 stainless screws oval head phillips #12 3" long
• 16may12 traveler end controls
• 13may12 stainless cotter pin sets
• 13may12 stainless hinge for top cabin/engine step
• 13may12 lock washers for engine bracket 3/8"
• 13may12 stainless screws for engine mount 3/8", 1.5" long
• 13may12 exhaust thru-hull
• 13may12 engine seawater in hose
• 13may12 bronze fittings for engine seawater in
• 13may12 prop paint
• 10may12 bottom paint - 3 gallons black - at pavilion
• 08may12 exhaust riser for perkins engine - ready to install 01apr12
• 08may12 engine bracket and engine mount - ordered by wally foster ??mar12
• 22apr12 gojo hand cleaner
• 22apr12 bleach
• 22apr12 simple green
• 22apr12 dust masks
• 22apr12 misc electrical parts (wire, breakers, lamp fixtures)
• 22apr12 misc hoses and fittings for cockpit scuppers
• 22apr12 parts trays for fasteners
•  ??apr12 hose for large manual pump
• 22apr12 fitting for exhaust thru-hull 1-3/4" thread to 2-3/8" barbed/smooth
• 01apr12 Y connector for 1-1/8" hose - ordered 01apr12 from jamestown
•  ??apr12 JABSCO 29290-1000 strum box for 1" hose
• 01apr12 whale gusher 10 rebuild kit
• 01apr12 1" antisiphon loop (seawater in to engine)
• 01apr12 10' engine stop cable plus hardware
• 01apr12 6" length of 2" ID hose - on boat
• 01apr12 Ultra Safety Systems Ultimate Mini float switch - on boat
• 01apr12 bandaids - on boat
• 01apr12 large and small wire ties - on boat
• 01apr12 large and small nylon wire clamps - on boat
• 01apr12 propane regulator - on boat
•  ??mar12 sponges - package of 6 on boat