Departure checklist
From MITNA
This is the checklist of things to do before getting underway.
- Remove companionway boards. Stow in starboard lazarette.
- Check recent log entries.
- Make log entry. Include at least the following:
- date and time
- name of each person on board
- Set battery switch to "House" (battery switch is on panel above galley sink)
- Configure electrical panels to desired operation, typically
- Navigation Instruments "on" (in panel above galley sink)
- Verify that the fuel lift pump "F Pump" switch is "on" (in panel above galley sink)
- FM Radio "on" (in panel above nav table, also energizes VHF radio)
- Navman "on" (in panel above nav table, energizes Garmin Chart Plotter)
- Check bilge water level and pump out if necessary (switch above galley sink).
- Check engine oil and coolant levels and top off if necessary.
- Mount ensign on stern rail
- Hoist MITNA burgee
- Give basic safety lecture for new sailors (must be less than 10 min.s):
- life jackets
- fire extinguishers
- man overboard procedures
- VHF radio operation
- avoiding the boom
- winch operation and safety
- lifelines and safety when going forward on deck