X-Dimension task list
From MITNA
Revision as of 15:35, 18 August 2011 by Bussolari@ll.mit.edu (Talk | contribs)
If a task is yours and you have additional information about it, please make a page for that task and post updates. When a task is completed, move it to the 'Completed Tasks' section, and include the date it was completed.
Please use the discussion page if you disagree with the prioritization of any of these tasks.
Contents
Maintenance Tasks (ongoing)
These tasks should be done after each trip.
- dinghy
- scrub floor
- freshwater rinse
- wipe salt residue from motor surfaces
- deck
- scrub the decks
- remove scuff marks from transom and aft hull
- freshwater rinse exterior above the waterline
- flush soot and dirt from toe rails
- head
- drain holding tank then flush it a few times
- scrub/wipe all surfaces
- clean drain pan and grid
- bilge
- scrub with brushes and rinse
- clean bilge well of any particles
- remove all slime and debris from pump strainers
- kitchen
- clean stove and oven
- clean sinks
- clean countertops
- main cabin
- wipe/scrub all wood surfaces with murphy's wood soap (diluted)
- wipe/scrub ceiling with simple green (diluted)
- wipe/scrub hatches and mast with simple green (diluted) to remove salt residue
Critical Tasks
High Priority Tasks
Commission Dinghy and berth at Waterboat Marina