Nav station switches wiring

From MITNA
Revision as of 15:13, 10 February 2008 by ThomS (Talk | contribs)

Jump to: navigation, search

Description of 12-volt wiring in the Main Switch Panel is divided into two parts:

First, the wiring which brings 12-volt power to the "hot" sides of the switches and circuit breakers is shown.

Second, we plan to describe the wiring from the switched-12volt side of switches/CBs. It isn't clear to this writer exactly where we'll break these discussions out into the individual subsystems being controlled.


12-volt DC "hot" side of switches/circuit-breakers IMG 0896-panel power-7x6-96p.jpg

(above) Diagram of wiring bringing 12-volt "hot" to switches and circuit breakers


The wiring above, bringing 12-volts to the switches so that -- when those switches are turned ON -- positive 12-volts will be available at the switches' terminals for which wiring is NOT shown on this diagram.

The wiring configuration is for the most part quite straightforeward, except for a couple things that we were not expecting when we started studying the wiring.

WALKTRHU:

Retrieved from "https://sailing.mit.edu/wiki/index.php?title=Nav_station_switches_wiring&oldid=2198"