Difference between revisions of "Shopping List"

From MITNA
Jump to: navigation, search
Line 51: Line 51:
  
 
* storm jib CDSJ 102 with standard #6 luff tape plus webbing
 
* storm jib CDSJ 102 with standard #6 luff tape plus webbing
* 2 triple clutches
+
* 6 single clutches
 
* 1 harken 75 mm block and shackle
 
* 1 harken 75 mm block and shackle
 
* spinaker sheets - 2x 100' 1/2" line (one red, one green) (old are 1/2" 90')
 
* spinaker sheets - 2x 100' 1/2" line (one red, one green) (old are 1/2" 90')

Revision as of 18:17, 21 May 2013

Please add here parts and supplies that are needed for the boat.

needed

  • pen holder for nav station
  • window gasket - fuller brush company; 12 3/8 x 5 1/4 gasket; 13.5 x 6.5 approx cutout
  • 2 collapsible oars for dinghy, with oar locks
  • 12v vacuum
  • 3 inclination indicators
  • 4 hooks for anchor rodes and tackle
  • 2 hooks for gaffing hooks
  • hydraulic wire cutter for shrouds
  • bilge pump counter
  • hose section 1 5/8" ID to 1 11/16" (?) ribbed OD
  • padlock for companionway
  • waterproof flashlights
  • plastic buckles for dodger straps
  • motor mount for pushpit 6.5"x6.5"x1.5"
  • 1 cheek block 2.5" shiv; 2" x 3.75" x 1.5" hole spacing
  • red reef line for second reef - 52'
  • yellow reef line for first reef - 25'?
  • storm jib sheets
  • large freezer ziploc bags
  • halifax equipment
    • trysail sheets - 28' each
    • fog horn (lung powered)
    • radar reflector
    • fire blanket for stove
    • drogue
    • cockpit knife
    • 50' of anchor chain
    • charts
    • tethers (6)
    • foul weather gear (6)
    • life raft (rental)
    • epirb (rental)
    • ais (rental)


from pavilion

in progress

  • storm jib CDSJ 102 with standard #6 luff tape plus webbing
  • 6 single clutches
  • 1 harken 75 mm block and shackle
  • spinaker sheets - 2x 100' 1/2" line (one red, one green) (old are 1/2" 90')

completed

  • 20may13 hot pads or oven mitts
  • 20may13 2 cutting boards - medium and small
  • 20may13 small portable bike pump
  • 20may13 trysail downhaul - using old jib sheet
  • 18may13 2 pvc end caps
  • 18may13 2 2.5 gallon plastic/rubber buckets with 15' tethers
  • 18may13 9/16" wrench
  • 18may13 8' pvc pipe 1.5" ID
  • 18may13 1 7/8" track stops
  • 18may13 1 cheek blocks 2.5" shiv; 2" x 3.75" x 1.5" hole spacing
  • 18may13 8 hose clamps for 2 3/8" hose
  • 17may13 companionway latch components - fast pin; 2 ss plates 0.75"x3.5"; 1 ss plate 1.5"x3.5"
  • 16may13 2 or 3 small blocks
  • 16may13 2 small cleats for flag for radar reflector
  • 16may13 simple green
  • 16may13 shock cord 10'
  • 16may13 cord for flags - 100' nylon cord
  • 16may13 lazy jack lines - 2x 1/4" 30'
  • 10may13 lifelines
  • 10may13 stainless bar stock for cubby retainers
  • 26apr13 50' 3/4" spring line (black)
  • 25apr13 second main halyard w/shackle blue w/white 130' 1/2" - arrives 23apr13
  • 25apr13 second spinakker halyard w/shackle white w/gr 125' 5/8" - arrives 20apr13
  • 25apr13 2 spinakker blocks harken 75 mm - arrives 20apr13
  • 25apr13 non-shedding welcome mat
  • 23apr13 battery clamps for starter battery
  • 23apr13 soundproof panel for engine compartment 2x 36" x 36" - arrives 23apr13
  • 22apr13 trysail track 7/8" 12' 2x - pickup 22apr13 from schaefer in new bedford
  • 17apr13 3 large padeyes for tethers
  • 17apr13 2 1.5" brass nipples
  • 17apr13 battery regulator
  • 15apr13 bottom paint black 2 gallons interlux micron
  • 15apr13 interlux 216 bottom paint thinner
  • 12apr13 26' 2" bilge hose (two 13' segments is ok)
  • 11apr13 4 dodger track end caps (1" wide track, 1/4" thick?)
  • 11apr13 hose clamps (4x 1.5"; 4x 2"; 8x 1.25"; 5x 1"; 5x 0.5")
  • 08apr13 scotchbrite wheels nylon flapper wheels
  • 08apr13 zirk grease fitting plus two spares 1/8 NPT
  • 08apr13 10 or 12 smaller storage bins 15" x 4"
  • 08apr13 10' garden hose
  • 08apr13 parts tray for large parts (pipe fittings, flax)
  • 06apr13 boeshield lubricant for steering chain
  • 04apr13 detco propspeed antifoul paint for propeller 200ml kit
  • 01apr13 simple green
  • 29mar13 acetone
  • 01apr13 epoxy
  • 03apr13 steering cables - oysterbay
  • 04apr13 baby stay - 50" pin-to-pin, 1/4" wire - oysterbay
  • 29mar13 hatch lens - 25 3/8 x 25 3/8 x 1/2 - j freeman 800.282.1150
  • 29mar13 hatch lens - 13 1/8 x 18 1/4 x 3/8 - j freeman
  • 29mar13 windows - 27 x 5 x 3/8 - j freeman
  • 01apr13 small bottle of wd40
  • 01apr13 small bottle of light oil
  • 27mar13 float switch
  • 27mar13 3 tubes white life caulk
  • 27mar13 racor filters
  • 27mar13 hacksaw and 6 blades
  • 27mar13 12v spotlight (recommended: Streamlight Waypoint)
  • 27mar13 12 storage bins shoebox size
  • 27mar13 50' heaving line
  • 27mar13 75' heaving line
  • 27mar13 springs and pawls for winches
  • 27mar13 bronze T fittings and nipples for cockpit scuppers (1.5")
  • 27mar13 2 prop zincs (1.25")
  • 27mar13 man overboard strobelight
  • 27mar13 man overboard float/flag
  • 16mar13 100' garden hose
  • 16mar13 needle nose pliers
  • 16mar13 small vise grips
  • 16mar13 2 led lamps
  •  ??nov12 socket head cap screw for roller furler - 5/16"-32 5/8" long
  • 12nov12 500' of nylon cord for mast halyards
  • 12nov12 12 gallons poly glycol for freshwater and engine seawater systems
  •  ??sep12 cover for dinghy outboard - 5hp mercury circa 2005
  •  ??sep12 solenoid (pending inspection/refurb of previous)
  •  ??aug12 swim ladder fender step
  • 11jul12 2 2" exhaust clamps
  • 11jul12 3" blower hose, 20 feet
  • 06jul12 boom vang tube - 3/8" pin, 70" pin-to-pin, C-series
  • 03jul12 traveller sheets - 3/8" 2x20'
  • 03jul12 freshwater fill hose - 1.5" diam, 46" long
  • 03jul12 non-skid black strips
  • 03jul12 white life caulk, 2 tubes
  • 03jul12 black life caulk, 2 tubes
  • 03jul12 3 small parts trays (home depot)
  • 02jul12 set of drill bits
  • 02jul12 garden hose
  • 02jul12 winch handle pocket to be mounted on mast
  • 02jul12 large fender
  • 01jul12 freshwater overflow hose - 1.5" diam, 76" long - leftover from bilge hoses
  • 01jul12 dust brush and pan
  • 01jul12 scissors
  • 01jul12 large vise grips
  • 29jun12 in-line blower 3" - squirrel cage not inline
  • 29jun12 2 3/16"D 1.5" long fastpins for hatch locks
  • 29jun12 5 stand-up springs for halyard blocks
  • 29jun12 mast boot
  • 29jun12 steel bands for exhaust tape
  • 29jun12 large hose clamp
  • 29jul12 small gasoline can for dinghy refueling, keep in dock box
  • 29jul12 two-stroke oil for dinghy outboard
  • 28jun12 5 halyard blocks for 1/2" line (main, 2 spin, 2 jib) - ordered 5 3" harken blocks 26jun12
  • 28jun12 2 blocks for 1/2" line (main sheet) - ordered 2 2 1/4" harken blocks 26jun12
  • 26jun12 snap shackles for dinghy tie-ups
  • 26jun12 1 small waste bin for head
  • 26jun12 jib sheets for racing jib: 2x 3/4" line, 40 feet - deferred
  • 26jun12 boom vang tackle: 352131 (Harken 8:1 Tackle YR-XL), West Marine part no. 7358880 - ordered 15jun12
  • 26jun12 traveler car: harken T3242B.HL - ordered 15jun12
  • 22jun12 gasket material for raw water strainer - perko
  • 22jun12 stainless mesh for raw water strainer - perko approx 6" tall, 1 1/4" in/out pipes
  • 17jun12 large anchor/rode bag
  • 17jun12 2 large hose clamps for mast boot - 25 3/4" and 43"
  • 17jun12 wood dowels - 3/4" diameter and 1 1/8" diameter to plug toerail holes
  • 17jun12 hooks for line stowage in stbd v-berth bin
  • 17jun12 3 cheek blocks for 1/2" line (main halyard, main sheet)
  • 17jun12 two boat hooks
  • 16jun12 mast boot kit
  • 16jun12 2 rolls oil blotter
  • 16jun12 holding tank treatment 4 bottles
  • 16jun12 large fender to replace uninflatable deflated one
  • 16jun12 8 1.5" high quality hose clamps for scupper T fittings
  • 13jun12 binder for manuals - keith has it, will deliver to boat 07apr12
  • 12jun12 fiberglass insulation for exhaust riser
  • 12jun12 blower exhaust vent
  • 12jun12 coolant: ethylene glycol with sodium nitrate/benzoate, 2 gallons
  • 12jun12 oil: 15W40, 5 quarts
  • 12jun12 45 degree 1.25" elbow bronze for seawater in
  • 12jun12 nuts and lockwashers for exhaust riser
  • 11jun12 two oil hoses
  • 20may12 1" to 1.25" bronze coupling (via threaded reducer)
  • 19may12 starter motor - deliver to wally for rebuild 11may12
  • 19may12 transducer paint
  • 19may12 replacement screws for prop shaft coupling - will use old ones
  • 17may12 30 stainless screws oval head phillips #12 3" long
  • 16may12 traveler end controls
  • 13may12 stainless cotter pin sets
  • 13may12 stainless hinge for top cabin/engine step
  • 13may12 lock washers for engine bracket 3/8"
  • 13may12 stainless screws for engine mount 3/8", 1.5" long
  • 13may12 exhaust thru-hull
  • 13may12 engine seawater in hose
  • 13may12 bronze fittings for engine seawater in
  • 13may12 prop paint
  • 10may12 bottom paint - 3 gallons black - at pavilion
  • 08may12 exhaust riser for perkins engine - ready to install 01apr12
  • 08may12 engine bracket and engine mount - ordered by wally foster ??mar12
  • 22apr12 gojo hand cleaner
  • 22apr12 bleach
  • 22apr12 simple green
  • 22apr12 dust masks
  • 22apr12 misc electrical parts (wire, breakers, lamp fixtures)
  • 22apr12 misc hoses and fittings for cockpit scuppers
  • 22apr12 parts trays for fasteners
  •  ??apr12 hose for large manual pump
  • 22apr12 fitting for exhaust thru-hull 1-3/4" thread to 2-3/8" barbed/smooth
  • 01apr12 Y connector for 1-1/8" hose - ordered 01apr12 from jamestown
  •  ??apr12 JABSCO 29290-1000 strum box for 1" hose
  • 01apr12 whale gusher 10 rebuild kit
  • 01apr12 1" antisiphon loop (seawater in to engine)
  • 01apr12 10' engine stop cable plus hardware
  • 01apr12 6" length of 2" ID hose - on boat
  • 01apr12 Ultra Safety Systems Ultimate Mini float switch - on boat
  • 01apr12 bandaids - on boat
  • 01apr12 large and small wire ties - on boat
  • 01apr12 large and small nylon wire clamps - on boat
  • 01apr12 propane regulator - on boat
  •  ??mar12 sponges - package of 6 on boat