Difference between revisions of "Departure checklist"

From MITNA
Jump to: navigation, search
Line 1: Line 1:
 
This is the checklist of things to do before getting underway.
 
This is the checklist of things to do before getting underway.
  
    * Retrieve key from starboard lazarette
+
* Remove companionway boards. Stow in starboard lazarette.
    * Remove companionway boards. Stow in starboard lazarette.
+
* Check recent log entries.
    * Check recent log entries.
+
* Make log entry. Include at least the following:
    * Make log entry. Include at least the following:
+
** date and time
          o date and time
+
** name of each person on board
          o name of each person on board
+
* Set battery switch to "House" (battery switch is on panel above galley sink)
    * Remove guppy. Stow guppy in bucket in starboard lazarette.
+
* Configure electrical panels to desired operation, typically
    * Set battery switch to "House" (battery switch is on panel above galley sink)
+
** Navigation Instruments "on" (in panel above galley sink)
    * Configure electrical panels to desired operation, typically
+
** Verify that the fuel lift pump "F Pump" switch is "on" (in panel above galley sink)
          o Navigation Instruments "on" (in panel above galley sink)
+
** FM Radio "on" (in panel above nav table, also energizes VHF radio)
          o Verify that the fuel lift pump "F Pump" switch is "on" (in panel above galley sink)
+
** Navman "on" (in panel above nav table, energizes Garmin Chart Plotter)
          o FM Radio "on" (in panel above nav table, also energizes VHF radio)
+
* Check bilge water level and pump out if necessary (switch above galley sink).
          o Navman "on" (in panel above nav table, energizes Garmin Chart Plotter)
+
* Check engine oil and coolant levels and top off if necessary.
    * Check bilge water level and pump out if necessary (switch above galley sink).
+
* Mount ensign on stern rail
    * Check engine oil and coolant levels and top off if necessary.
+
* Hoist MITNA burgee
    * Remove binnacle metal cover and stow.
+
* Give basic safety lecture for new sailors (must be less than 10 min.s):
    * Mount ensign on stern rail
+
** life jackets
    * Hoist MITNA burgee
+
** fire extinguishers
    * Give basic safety lecture for new sailors:
+
** man overboard procedures
          o life jackets
+
** VHF radio operation
          o fire extinguishers
+
** avoiding the boom
          o man overboard procedures
+
** winch operation and safety
          o VHF radio operation
+
** lifelines and safety when going forward on deck
          o use of head (note that head is currently (09/14/2011)inoperative and placarded)
+
          o avoiding the boom
+
          o Winch operation and safety
+

Revision as of 08:49, 15 September 2011

This is the checklist of things to do before getting underway.

  • Remove companionway boards. Stow in starboard lazarette.
  • Check recent log entries.
  • Make log entry. Include at least the following:
    • date and time
    • name of each person on board
  • Set battery switch to "House" (battery switch is on panel above galley sink)
  • Configure electrical panels to desired operation, typically
    • Navigation Instruments "on" (in panel above galley sink)
    • Verify that the fuel lift pump "F Pump" switch is "on" (in panel above galley sink)
    • FM Radio "on" (in panel above nav table, also energizes VHF radio)
    • Navman "on" (in panel above nav table, energizes Garmin Chart Plotter)
  • Check bilge water level and pump out if necessary (switch above galley sink).
  • Check engine oil and coolant levels and top off if necessary.
  • Mount ensign on stern rail
  • Hoist MITNA burgee
  • Give basic safety lecture for new sailors (must be less than 10 min.s):
    • life jackets
    • fire extinguishers
    • man overboard procedures
    • VHF radio operation
    • avoiding the boom
    • winch operation and safety
    • lifelines and safety when going forward on deck