Difference between revisions of "Web Server"

Revision as of 22:09, 2 July 2010

This entry contains information on the packages installed in the web server and the process followed for their installation.

The Wiki began very late in the process, so it will be completed slowly over time.

Volunteer Web Server Introduction

Accounts are setup to try to use the same username and password as MIT Athena. To login to the server you need to point an SSH (secure telnet) client to:

 sailing.mit.edu

Users also have a local password, different than the Athena password, which is required to use "sudo".

A general knowledge of both HTML and PHP is expected.

All the website files are all located at:

 /home/mitna

The main public website is at:

 /home/mitna/public_html

The secure parts of the site are at:

 /home/mitna/ssl_html

Utility files (very important - they define the framework of the site) are at:

 /home/mitna/includes

To understand the basic structure of webpages please see the templates at:

 /home/mitna/public_html/template_full.php
 /home/mitna/public_html/template_noevents.php

Always keep the general structure of the website as is; please do not create new directories unless you have consulted the webmaster.

General Server Setup

Two servers have been setup since the Wiki was started, both using Debian:

• 2009 - Dell Optiplex 760
• 2004 - Custom Build

SSL Server Certificates

When certificates expire (they are given for one year at a time), you need to send a new certificate request to

 mitcert@mit.edu

Follow the directions at:

 http://web.mit.edu/apache-ssl/www-rev11/README.certificate

Do everything out of /home/mitna/CA (you don't need to do anything on Athena, all local on the server)

The files you really need at the end are:

req.pem sailing.key (I like this name instead of https-key.pem)

(rename the old ones reqYY-YY.pem and sailingYY-YY.key, where YY-YY are the years the file is valid, e.g. 07-08 were the first ones)

Feel free to delete foo.

 E-mail req.pem to mitcert@mit.edu
 SAVE sailing.key, it is essential

When you receive the Certificate:

Again in /home/mitna/CA

1 - Rename sailing.pem to sailingYY-YY.pem
2 - Create a new sailing.pem
3 - Put in it:
  a) the contents of sailing.key
  b) the exact e-mail with the certificate, starting with
     Certificate:
  then the rest.
  Include all --- BEGIN --- and --- END --- lines
4 - Restart apache (sudo apache2ctl restart)

You're done. Check that the certificate has updated.

Weather Station

The Weather Station is a Vantage Pro2 hard wired model.

USB

To get the USB-serial (CP2102) working I followed these steps:

 sudo mount -t usbfs usbdevfs /proc/bus/usb
 sudo cat /proc/bus/usb/devices         

which tells you the VID and PID for:

 sudo modprobe usbserial vendor=0x10c4 product=0xea61

after which by running

 sudo dmesg

you should something like the following:

 usbserial_generic 1-1:1.0: generic converter detected
 usb 1-1: generic converter now attached to ttyUSB0
 usbcore: registered new driver usbserial_generic

At this point the setup should be connected.

You configure the baud rate using

 sudo stty -F /dev/ttyUSB0 19200

and can see the current configuration with

 sudo stty -F /dev/ttyUSB0

This should make it work (NOTE: 2010/07/02 having problems, cannot connect to the console, not sure why...)

NEW

W View did not make me happy (it could not give 'real-time' results, only show things about every minute or even more... plus I could not get it to save data to the database to interface easily with PHP.

So, I looked more around, and found this super easy program to use:

 http://www.joejaworski.com/weather/

Since our station is in USB and next to the computer, the ONLY software needed is:

 vproweather
 http://www.joejaworski.com/weather/vproweather-0.6.tgz

I downloaded/untared it to:

 /usr/local/pkgs/vproweather-0.6/

A simple 'make' (using sudo) was all that was needed to compile it. Then, running it with:

 /usr/local/pkgs/vproweather-0.6/vproweather -x /dev/ttyUSB0

Gives real time data, and using '-l' instead of '-x' gives low/high data.

I put this in a cron to run the real-time every 1 minute (fastes crontab can do) and update a table in the database, which is then used by the rest of the site (table: weather). The low/high will run once a day.

Hopefully I'll be able to create a daemon which updates the table every 10 seconds or so... we'll see.

"Dynamic" Update

In order to update the weather information dynamically, I got the following packages online:

 ajax-dynamic-contant.js - from DHTMLGoodies.com (Alf Magne Kalleland)
 ajax.js - Simple AJAX Code Kit (SACK) - twilightuniverse.com (Gregory Wild-Smith)

I then modified vpro.php to create a file in

 html/inc/weather.txt

which updated every time the cron process runs and which is read by the ajax tools.

The header function in format.php now calls a set of javascript functions which load the weather.txt file, instead of using sql to obtain the information from the database.

Now the weather information updates dynamically, without having to reload a page.

OLD

The linux software is W View. I followed the User Manual detailed instructions.

Install (untar) to:

• /usr/local/pkgs/wview-3.3.0

Commands (what should be done next time in order, I did not do it in this order):

• Installed mysqlclient-dev: sudo apt-get install libmysqlclient-dev
• Installed libpng-dev: sudo apt-get install libpng12-dev
• Install 'radlib':
• get .tar
• install to /urs/local/pkgs/radlib-2.7.0
• ./configure
• make
• sudo make install
• edit /etc/ld.so.conf --> add /usr/local/lib --> run ldconfig
• Install 'libgd' (all with sudo):
• get .tar
• install to /usr/local/pkgs/gd-2.0.35
• ./configure
• make
• make install
• ./configure --enable-mysql
• sudo make
• sudo make install

Not working! Will need to check USB drivers/connection