Difference between revisions of "De-Winterization"
From MITNA
m (Xdim springification moved to De-Winterization) |
|||
| Line 1: | Line 1: | ||
This is a list of things to do to make the boat ready for the sailing season. | This is a list of things to do to make the boat ready for the sailing season. | ||
| + | |||
| + | = general = | ||
| + | * remove tent, store at pavilion | ||
| + | * remove thru-hull caps (1 exhaust, 2 bilge) | ||
| + | |||
| + | = power train = | ||
| + | * open seawater in thru-hull | ||
| + | * check oil level | ||
| + | * check transmission fluid level | ||
| + | * check state of seawater impeller | ||
| + | * check prop shaft | ||
| + | * check stuffing box | ||
| + | |||
| + | = freshwater = | ||
| + | * check freshwater filter | ||
| + | * run freshwater pressure pump | ||
| + | * pressurize system and check for leaks | ||
| + | * flush antifreeze from freshwater system - hoses, taps, hot water tank | ||
| + | |||
| + | = rigging = | ||
| + | * install halyards and sheets | ||
| + | * install mainsail | ||
| + | * install jib | ||
| + | |||
| + | = electronics = | ||
| + | * check battery levels | ||
Revision as of 09:12, 6 February 2012
This is a list of things to do to make the boat ready for the sailing season.
general
- remove tent, store at pavilion
- remove thru-hull caps (1 exhaust, 2 bilge)
power train
- open seawater in thru-hull
- check oil level
- check transmission fluid level
- check state of seawater impeller
- check prop shaft
- check stuffing box
freshwater
- check freshwater filter
- run freshwater pressure pump
- pressurize system and check for leaks
- flush antifreeze from freshwater system - hoses, taps, hot water tank
rigging
- install halyards and sheets
- install mainsail
- install jib
electronics
- check battery levels
