Difference between revisions of "De-Winterization"

From MITNA
Jump to: navigation, search
(rigging)
(Safety)
 
(6 intermediate revisions by one user not shown)
Line 1: Line 1:
 
This is a list of things to do to make the boat ready for the sailing season.
 
This is a list of things to do to make the boat ready for the sailing season.
  
= power train =
+
= General Pre-Launch Tasks=  
* open seawater in thru-hull
+
* Set a launch date with Dions
* check oil level
+
* Confirm waterboat marina slip
* check transmission fluid level
+
* Return all equipment to the boat from the pavilion
* check state of seawater impeller
+
* Scrape dinghy bottom of all barnacles and repaint with new antifouling
* check prop shaft
+
* Renew dinghy registration (ask the Dockmaster)
* check stuffing box
+
* Renew Mashnee mooring permit (ask the Dockmaster)
 +
* Review toolbag for completeness and function (e.g. wire brush off any rust)
  
= freshwater =
+
= Safety =  
* check freshwater filter
+
* Inspect fire extinguishers (date)
* run freshwater pressure pump
+
* Inspect safety equipment (flares for expiration date)
* pressurize system and check for leaks
+
* Ensure tethers are all in good working order
* flush antifreeze from freshwater system - hoses, taps, hot water tank
+
* Test MOB1 devices
 +
* Inspect PFDs (inflation check, dates on inflator cartridges)
 +
* Inventory medical kit and check all expiration dates -- refresh as needed
  
= electronics =
+
= Electronics =
 
* check battery levels
 
* check battery levels

Latest revision as of 07:33, 15 April 2024

This is a list of things to do to make the boat ready for the sailing season.

General Pre-Launch Tasks

  • Set a launch date with Dions
  • Confirm waterboat marina slip
  • Return all equipment to the boat from the pavilion
  • Scrape dinghy bottom of all barnacles and repaint with new antifouling
  • Renew dinghy registration (ask the Dockmaster)
  • Renew Mashnee mooring permit (ask the Dockmaster)
  • Review toolbag for completeness and function (e.g. wire brush off any rust)

Safety

  • Inspect fire extinguishers (date)
  • Inspect safety equipment (flares for expiration date)
  • Ensure tethers are all in good working order
  • Test MOB1 devices
  • Inspect PFDs (inflation check, dates on inflator cartridges)
  • Inventory medical kit and check all expiration dates -- refresh as needed

Electronics

  • check battery levels