Difference between revisions of "De-Winterization"
From MITNA
(→general) |
(→Safety) |
||
| (7 intermediate revisions by one user not shown) | |||
| Line 1: | Line 1: | ||
This is a list of things to do to make the boat ready for the sailing season. | This is a list of things to do to make the boat ready for the sailing season. | ||
| − | = | + | = General Pre-Launch Tasks= |
| − | * | + | * Set a launch date with Dions |
| − | * | + | * Confirm waterboat marina slip |
| − | * | + | * Return all equipment to the boat from the pavilion |
| − | * | + | * Scrape dinghy bottom of all barnacles and repaint with new antifouling |
| − | * | + | * Renew dinghy registration (ask the Dockmaster) |
| − | * | + | * Renew Mashnee mooring permit (ask the Dockmaster) |
| + | * Review toolbag for completeness and function (e.g. wire brush off any rust) | ||
| − | = | + | = Safety = |
| − | * | + | * Inspect fire extinguishers (date) |
| − | * | + | * Inspect safety equipment (flares for expiration date) |
| − | * | + | * Ensure tethers are all in good working order |
| − | * | + | * Test MOB1 devices |
| + | * Inspect PFDs (inflation check, dates on inflator cartridges) | ||
| + | * Inventory medical kit and check all expiration dates -- refresh as needed | ||
| − | = | + | = Electronics = |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
* check battery levels | * check battery levels | ||
Latest revision as of 07:33, 15 April 2024
This is a list of things to do to make the boat ready for the sailing season.
General Pre-Launch Tasks
- Set a launch date with Dions
- Confirm waterboat marina slip
- Return all equipment to the boat from the pavilion
- Scrape dinghy bottom of all barnacles and repaint with new antifouling
- Renew dinghy registration (ask the Dockmaster)
- Renew Mashnee mooring permit (ask the Dockmaster)
- Review toolbag for completeness and function (e.g. wire brush off any rust)
Safety
- Inspect fire extinguishers (date)
- Inspect safety equipment (flares for expiration date)
- Ensure tethers are all in good working order
- Test MOB1 devices
- Inspect PFDs (inflation check, dates on inflator cartridges)
- Inventory medical kit and check all expiration dates -- refresh as needed
Electronics
- check battery levels
