Difference between revisions of "(by person)"

From MITNA
Jump to: navigation, search
(Other:)
(Other:)
 
(28 intermediate revisions by one user not shown)
Line 3: Line 3:
 
==Greg:==
 
==Greg:==
 
* Repair keel - Greg. Greg has made good progress, Franny will push for him to complete the keel for launch.
 
* Repair keel - Greg. Greg has made good progress, Franny will push for him to complete the keel for launch.
* Paint bottom.
+
* Finish painting bottom.
Greg should provide guidance wrt bottom, mast/boom and topsides painting.
+
* Work on outhaul on boom
  
==Lloyd:==
+
==Adam:==
* Fix engine oil leaks - Lloyd. Lloyd says he’s on this; I’ll keep pushing him. No real Plan B if Lloyd doesn’t move on this; I think we need to pull the engine to do the job right.
+
* Repair dodger - Adam
 +
* Inflate red dinghy,  move to Waterboat.
 +
 
 +
==Ted:==
 +
* Inspect steering gear, grease rudderpost - Ted
 +
* Put batteries on boat
  
 
==Eric:==
 
==Eric:==
* Remove corrosion on mast and boom; repaint - Eric  We should work on the boom and the mast. No progress on this yet that I know of.
 
 
* Binnacle light - Eric (can be done after splash)
 
* Binnacle light - Eric (can be done after splash)
  
 
==Scott:==
 
==Scott:==
* Replace nuts on rear quarter fittings - Scott
+
* Replace nuts on rear quarter fittings ( 3 to go ) - Scott
* New blocks for mainsheet - Scott  These are on the boat.
+
* New shackles to fasten traveler adjusting blocks to car - Scott.
+
* Inspect running rigging - Scott. Done. Need to take a length of rigging to the riggers for work.
+
* Take harnesses/jacklines/foulies/radios&plugs/puck compass/ditch bag/laptop/iPad to boat. Halyards and blocks and pfds on boat.
+
 
+
==Ted:==
+
* Replace damaged NMEA terminator for anemometer on masthead - Ted
+
* Inspect steering gear, grease rudderpost - Ted
+
* Condition batteries - Ted. I have no idea where this is at.
+
 
+
==Adam:==
+
* Repair dodger - Adam
+
* Get main, #1, #3 and spinnaker from North
+
 
+
==Tim:==
+
* Restitch wheel cover
+
  
 
==Other:==
 
==Other:==
 
* Take cushions from pav to boat (shortly before launch)
 
* Take cushions from pav to boat (shortly before launch)
* Take boom to boat. Will use Violeta's truck.
+
* Clean tools (use vinegar and scotchbrite; then spray with WD40)
* Inflate red dinghy, coat with ArmorAll, move to Waterboat.
+
* Clean S/S engine pan, and hull underneath
* Clean, buff and Propspeed prop (think there is propspeed at the pav, but not much)
+
* Replace prop shaft zincs
+

Latest revision as of 14:41, 30 March 2016

Edit to show progress...

Greg:

  • Repair keel - Greg. Greg has made good progress, Franny will push for him to complete the keel for launch.
  • Finish painting bottom.
  • Work on outhaul on boom

Adam:

  • Repair dodger - Adam
  • Inflate red dinghy, move to Waterboat.

Ted:

  • Inspect steering gear, grease rudderpost - Ted
  • Put batteries on boat

Eric:

  • Binnacle light - Eric (can be done after splash)

Scott:

  • Replace nuts on rear quarter fittings ( 3 to go ) - Scott

Other:

  • Take cushions from pav to boat (shortly before launch)
  • Clean tools (use vinegar and scotchbrite; then spray with WD40)
  • Clean S/S engine pan, and hull underneath