Difference between revisions of "Storm checklist"
From MITNA
| (2 intermediate revisions by one user not shown) | |||
| Line 1: | Line 1: | ||
In the event of a hurricane or other big storm approaching, the following should be done: | In the event of a hurricane or other big storm approaching, the following should be done: | ||
| − | * If two mooring pennants are not available, add a dockline as a second mooring line, tied with a bowline to the mooring ball and secured the other cleat on the bow | + | * If two mooring pennants are not available, add one |
| + | ** Anchor rode, using the shackle to attach to the ball and the rode to the cleat | ||
| + | ** Or if not: a dockline as a second mooring line, tied with a bowline to the mooring ball and secured the other cleat on the bow | ||
| + | * Add chafe gear to all mooring line contact points | ||
* Remove foresail, leaving a bare pole. Secure halyard elsewhere, using storage line to keep furler head from skying | * Remove foresail, leaving a bare pole. Secure halyard elsewhere, using storage line to keep furler head from skying | ||
* Depending on severity, either tie lines around mainsail or remove it from the boom and secure it below decks | * Depending on severity, either tie lines around mainsail or remove it from the boom and secure it below decks | ||
| Line 8: | Line 11: | ||
* Replace ventilators with flat caps | * Replace ventilators with flat caps | ||
* Ensure all seacocks are closed -- definitely sink -- questions about others? | * Ensure all seacocks are closed -- definitely sink -- questions about others? | ||
| + | * Remove the radar mast and lash below | ||
Latest revision as of 10:51, 14 September 2023
In the event of a hurricane or other big storm approaching, the following should be done:
- If two mooring pennants are not available, add one
- Anchor rode, using the shackle to attach to the ball and the rode to the cleat
- Or if not: a dockline as a second mooring line, tied with a bowline to the mooring ball and secured the other cleat on the bow
- Add chafe gear to all mooring line contact points
- Remove foresail, leaving a bare pole. Secure halyard elsewhere, using storage line to keep furler head from skying
- Depending on severity, either tie lines around mainsail or remove it from the boom and secure it below decks
- Ensure all hatches are dogged
- Remove all canvas covers
- Replace ventilators with flat caps
- Ensure all seacocks are closed -- definitely sink -- questions about others?
- Remove the radar mast and lash below
