Difference between revisions of "Shopping List"

From MITNA
Jump to: navigation, search
(needed)
 
(84 intermediate revisions by 5 users not shown)
Line 3: Line 3:
 
==needed==
 
==needed==
  
* pen holder for nav station
+
* 3x O-rings for dorade vent covers
* window gasket - fuller brush company; 12 3/8 x 5 1/4 gasket; 13.5 x 6.5 approx cutout
+
* 3" diameter dorade vent x2
* hooks for fender stowage in port lazarette
+
* Welding glove for emergency flares
* 3" blower hose, 15 feet
+
* Eye strap for lee cloth: https://pro.westmarine.com/sea-dog-brass-eye-strap-257618.html or https://www.jamestowndistributors.com/product/product-detail/63333
* in-line blower 3"
+
* 2x MOB AIS units: https://pro.westmarine.com/ocean-signal-rescueme-mob1-ais-dsc-personal-locator-beacon-16749251.html
* 2 3/16"D 1.5" long fastpins for hatch locks
+
* freshwater fill hose - 1.5" diam, 46" long
+
* freshwater overflow hose - 1.5" diam, 76" long
+
* 2 oars for dinghy, collapsible
+
* cover for dinghy outboard
+
* small gasoline can for dinghy refueling, keep in dock box
+
* two-stroke oil for dinghy outboard
+
* baby stay - 50" pin-to-pin, 1/4" wire
+
* swim ladder
+
* 5 stand-up springs for halyard blocks
+
* mast boot
+
  
* stove
+
* Hand sanitizer for onboard use
** propane hose 15'
+
* 8 wood hangers for the foulies
** shutoff valve
+
* A metric socket set for onboard tasks (e.g. engine work)
** solenoid (pending inspection/refurb of previous)
+
* 2 x  safety glasses for the tool kit
  
* engine
+
==from pavilion==
** alternator belt 39.5" (40" should be ok) 25-9425
+
** transmission fluid: ?
+
  
* rigging
+
==in progress==
** spinnaker halyard: 1/2" 130' white w/green (was 9/16") - ordered 27jun12, deliver 03jul12
+
** main halyard: 1/2" 142' solid blue - ordered 27jun12, deliver 03jul12
+
** jib sheets: 2x 5/8" 75' - (was 3/4") - ordered 27jun12, deliver 03jul12
+
** main sheet: 1/2" 57' white - ordered 27jun12, deliver 03jul12
+
** vang line: 3/8" 18' black - ordered 27jun12, deliver 03jul12
+
** boom vang tube - 3/8" pin, 70" pin-to-pin, C-series
+
** boom vang spring
+
  
 
==completed==
 
==completed==
 
* 28jun12 5 halyard blocks for 1/2" line (main, 2 spin, 2 jib) - ordered 5 3" harken blocks 26jun12
 
* 28jun12 2 blocks for 1/2" line (main sheet) - ordered 2 2 1/4" harken blocks 26jun12
 
* 26jun12 snap shackles for dinghy tie-ups
 
* 26jun12 1 small waste bin for head
 
* 26jun12 jib sheets for racing jib: 2x 3/4" line, 40 feet - deferred
 
* 26jun12 boom vang tackle: 352131 (Harken 8:1 Tackle YR-XL), West Marine part no. 7358880 - ordered 15jun12
 
* 26jun12 traveler car: harken T3242B.HL - ordered 15jun12
 
* 22jun12 gasket material for raw water strainer - perko
 
* 22jun12 stainless mesh for raw water strainer - perko approx 6" tall, 1 1/4" in/out pipes
 
* 17jun12 large anchor/rode bag
 
* 17jun12 2 large hose clamps for mast boot - 25 3/4" and 43"
 
* 17jun12 wood dowels - 3/4" diameter and 1 1/8" diameter to plug toerail holes
 
* 17jun12 hooks for line stowage in stbd v-berth bin
 
* 17jun12 3 cheek blocks for 1/2" line (main halyard, main sheet)
 
* 17jun12 two boat hooks
 
* 16jun12 mast boot kit
 
* 16jun12 2 rolls oil blotter
 
* 16jun12 holding tank treatment 4 bottles
 
* 16jun12 large fender to replace uninflatable deflated one
 
* 16jun12 8 1.5" high quality hose clamps for scupper T fittings
 
* 13jun12 binder for manuals - keith has it, will deliver to boat 07apr12
 
* 12jun12 fiberglass insulation for exhaust riser
 
* 12jun12 blower exhaust vent
 
* 12jun12 coolant: ethylene glycol with sodium nitrate/benzoate, 2 gallons
 
* 12jun12 oil: 15W40, 5 quarts
 
* 12jun12 45 degree 1.25" elbow bronze for seawater in
 
* 12jun12 nuts and lockwashers for exhaust riser
 
* 11jun12 two oil hoses
 
* 20may12 1" to 1.25" bronze coupling (via threaded reducer)
 
* 19may12 starter motor - deliver to wally for rebuild 11may12
 
* 19may12 transducer paint
 
* 19may12 replacement screws for prop shaft coupling - will use old ones
 
* 17may12 30 stainless screws oval head phillips #12 3" long
 
* 16may12 traveler end controls
 
* 13may12 stainless cotter pin sets
 
* 13may12 stainless hinge for top cabin/engine step
 
* 13may12 lock washers for engine bracket 3/8"
 
* 13may12 stainless screws for engine mount 3/8", 1.5" long
 
* 13may12 exhaust thru-hull
 
* 13may12 engine seawater in hose
 
* 13may12 bronze fittings for engine seawater in
 
* 13may12 prop paint
 
* 10may12 bottom paint - 3 gallons black - at pavilion
 
* 08may12 exhaust riser for perkins engine - ready to install 01apr12
 
* 08may12 engine bracket and engine mount - ordered by wally foster ??mar12
 
* 22apr12 gojo hand cleaner
 
* 22apr12 bleach
 
* 22apr12 simple green
 
* 22apr12 dust masks
 
* 22apr12 misc electrical parts (wire, breakers, lamp fixtures)
 
* 22apr12 misc hoses and fittings for cockpit scuppers
 
* 22apr12 parts trays for fasteners
 
* ??apr12 hose for large manual pump
 
* 22apr12 fitting for exhaust thru-hull 1-3/4" thread to 2-3/8" barbed/smooth
 
* 01apr12 Y connector for 1-1/8" hose - ordered 01apr12 from jamestown
 
* ??apr12 JABSCO 29290-1000 strum box for 1" hose
 
* 01apr12 whale gusher 10 rebuild kit
 
* 01apr12 1" antisiphon loop (seawater in to engine)
 
* 01apr12 10' engine stop cable plus hardware
 
* 01apr12 6" length of 2" ID hose - on boat
 
* 01apr12 Ultra Safety Systems Ultimate Mini float switch - on boat
 
* 01apr12 bandaids - on boat
 
* 01apr12 large and small wire ties - on boat
 
* 01apr12 large and small nylon wire clamps - on boat
 
* 01apr12 propane regulator - on boat
 
* ??mar12 sponges - package of 6 on boat
 

Latest revision as of 13:49, 31 July 2023

Please add here parts and supplies that are needed for the boat.

needed

  • Hand sanitizer for onboard use
  • 8 wood hangers for the foulies
  • A metric socket set for onboard tasks (e.g. engine work)
  • 2 x safety glasses for the tool kit

from pavilion

in progress

completed