View source for Nav station switches wiring

Description of 12-volt wiring in the Main Switch Panel is divided into two parts: 
 
First, the wiring which brings 12-volt power to the "hot" sides of the switches and circuit breakers is shown.
 
Second, we plan to describe the wiring from the switched-12volt side of switches/CBs.  It isn't clear to this writer exactly where we'll break these discussions out into the individual subsystems being controlled.  

<hr>
<br>
'''12-volt DC "hot" side of switches/circuit-breakers'''
[[IMAGE:IMG_0896-panel_power-7x6-96p.jpg]]
::(above) Diagram of wiring bringing 12-volt "hot" to switches and circuit breakers
<br>
The wiring above, bringing 12-volts to the switches so that -- when those switches are turned ON -- positive 12-volts will be available at the switches' terminals for which wiring is NOT shown on this diagram.  

The wiring configuration is for the most part quite straightforeward, except for a couple things that we were not expecting when we started studying the wiring.

WALKTRHU: